Parts selection / 4 min read
What to check before ordering edgebander cloth buffing wheels
For an edgebander cloth buffing wheel enquiry, provide the old wheel's outside diameter, width, centre bore and fixing arrangement, together with photographs of its position in the polishing unit. State the quantity for each design and whether you need only the wheel or related parts. The cloth wheel and polishing motor are separate purchasing items.
Do I need the cloth wheel or the polishing motor?
Mark the required item in a photograph of the polishing unit. A cloth-wheel request concerns the wheel fitted to that unit; it does not automatically include the motor, shaft or fixing hardware shown nearby. List any additional parts separately.
If the motor is also required, add a separate motor enquiry with its full nameplate, shaft and mounting details. The wheel's outside appearance does not establish the motor's electrical specification or mounting arrangement.
Which dimensions should I keep separate?
Record outside diameter, cloth-wheel body width and centre-bore dimensions as separate readings. Include the unit and show each measurement position in a photograph. If the centre fixing projects beyond the cloth body, describe it separately instead of calling the whole assembled width the cloth-wheel width.
Photograph the hole shape and fixing arrangement as well as recording the size. If the old wheel is worn or deformed, mark the affected readings as uncertain and include any complete original markings or part number you have.
| Check | What to show |
|---|---|
| Outside diameter | The measured outside surface, unit and any visible wear. |
| Wheel-body width | The cloth body, with projecting centre or fixing parts identified separately. |
| Centre bore | Hole dimensions and shape, supported by a clear centre close-up. |
| Fixing arrangement | How the wheel is held on the existing unit and which related parts are requested. |
Which photographs should accompany the measurements?
Send an overall view, side view and close-up of the centre bore and clamping area. Include a wider installed-position photograph so the wheel and surrounding unit can be understood together. Photograph visible construction details and complete markings without using them as a substitute for dimensions.
A product photograph helps identify the family; it cannot confirm material, service life, origin or fit for every machine. Tell our team if a particular material or construction is required so it can be checked for the quoted item.
How do I prepare a replenishment list with several wheel versions?
Give every size or design its own item reference, photographs and quantity. Keep the wheel's installed position with that line. Do not combine different centre fixings or widths under one quantity merely because all items are called buffing wheels.
For each quoted line, confirm the wheel design, included fixing pieces and quantity. If motors or other edgebander parts are requested in the same list, keep them as separate lines and review their availability and dispatch arrangements individually.
Can I enquire before every measurement is available?
Yes. Start with the photographs and information you already have, and mark the missing points. Our sales team can make an initial review and follow up with you. A review of the old wheel is a starting point; the product version and included parts still need confirmation before ordering.
Open an enquiry from the related cloth-wheel product page to keep its name and link with your draft. After contact, share your labelled photographs or purchasing list by email or WhatsApp. Confirm the final quantity, quoted amount and dispatch arrangements with our team.
Let’s check your requirements.
Use these points to start a conversation. Our sales team will discuss the specific parts with you.
Discuss your parts